Change Themes
  • Welcome!  Sign in  or  Register

  • Wholesale ZTW Gecko LCD Programming Card 180000010


  • Wholesale ZTW Programming Card for Beast ESCs


  • Wholesale ZTW Beatles Programming Card


  • Wholesale ZTW Mantis Programming Card


  • Wholesale ZTW Program Card For Mantis Series ESC Electronic Speed Control With LED


  • ZTW Mantis Programming Card

ZTW Mantis Programming Card

  • item#: ZTW-Mantis-PCard
  • Retail price: US$32.00
  • Wholesale Price: 16.99

  • Start from: 1 Unit(s)
  • US$16.99 + Shipping Cost
    Quantity: Unit(s)


      Real product color may vary.
      This programming can be used to program all ZTW Mantis Series brushless ESCs quickly and easily, except for the Mantis 6A ESC. 
      Note: ONLY compatible with ZTW Mantis-Series ESCs. Cannot be used to program ZTW Gecko Series or other ZTW ESCs. 

      Programmable Options: 
      Brake setting (off/soft/mid/hard -- default: off) 
      Battery type: (Ni-XX/LiPo/LiFe -- default: LiPo auto detect) 
      Low voltage cutoff setting (2.8V / 3.0V / 3.2V / None -- default: 3.0V) 
      Factory default setup reset Timing settings (auto / 2° / 5° / 8° /15° / 22° /30° -- default: auto) 
      SBEC output voltage (on 45A and larger models only) (5.0V / 5.5V / 6.0V -- default: 5.0V)
      Governor mode (RPM off / 1st soft start / 2nd soft start / gov mod 1 / gov mod 2 -- default: RPM off) 
      Motor rotation (forward / reverse -- default: forward) 
      Start-up strength (10% / 15% / 20% / 25% / 30% / 35% / 40% / 45% / 50% -- default: 30%) 
      Low voltage cutoff type: (reduce power / cut-off power -- default: reduce)

      How to Use the LED Program Card: 

      1.ZTW Program card with LED display is easy to use and convenient to carry. All of the programmable functions are shown on the program card.

      2.Turn on the ESC. Remove the signal wire and plug it into the top-socket on the program card, wait for 2 seconds until the LED is on.

      3.If ESC is not connected with the batteries, the program card should be connected with other power supply, the range of power supply is from 5.0V to 6.3V.

      4.Press the button ”Menu” on the program card and circularly select each programmable function. At that time the number of programmable function will be displayed on the left of the LED, the current value will be displayed on the right side. Then press the button “Value” to change the value and press the button “OK” to confirm. At the same time the Red indicating LEDs of both program card and the ESC will blink. Turn off the ESC, the modified settings will be saved in the ESC`s memory.

      5.Press the button “Reset” to restore the default settings.

      Dimensions: 70x45x13mm(LxWxH)
      Weight: 23g

      Write a Review:

      Tell us what you think about this item, share your opinion with other people. Please make sure that your review focus on this item. All the reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.

      Have any question or inquire for this item? Please contact Customer Service. (Our customer representative will get back shortly.)

        Indicates required fields*
        Your Name: *
        Enter your Reviewer Nickname
        Your Email: *
        Review Title: *

      Related Categories

      Search Feedback

      • Did you find what you were looking for?
      • If you need help or have other feedback for Customer Service. Click here

      Copyright © 2018 ZTW Retail Store. All Rights Reserved.